Fiber optic cable and wire and cable are the same, there are many ways to fix it with the connector, the most important fixing method is: use hot-melt epoxy bonding method, use adhesive bonding method or use non-adhesion (pressing) The way. However, due to the high degree of clutter in optical fiber connections, it is more costly and labor intensive to fix the optical fiber and optical fiber connector than to fix the circuit connector to the cable. Fiber connectors can be bonded or crimped to ensure that the connector can accommodate the protective cover of the fiber. Optical fiber connectors that use an adhesive method use epoxy or hot melt resin to hold the fiber in the connector box and generally provide other first-class functions. Secondly, the non-adhesive final fixation method is used to effectively use the friction force to trap the optical fiber in the connector box of the connector. This method is comparatively convenient and the cost is relatively low. It is generally used in on-site repair occasions. No matter what kind of fixing method is used, the final fixing process of the optical fiber and connector is generally to first polish the naked optical fiber and the calibration hoop, and determine the final length of the optical fiber according to the best position and function, so as to finish the fixation. This is more cluttered than the circuit connection. The circuit connection only requires some simple things. The optical fiber connection requires many professional things. Different types of optical fiber connectors have different special needs for stripping the cable, blocking and polishing the optical fiber. The delicate nature of the fiber and the need for professional adjustment of the fiber's mating surface within the connector allow precise positioning to ensure the functionality of the fiber. The above is a brief introduction by Lu Chuan Xiaobian about how to fix the fiber and fiber connector. There is a need to contact us. We will serve you wholeheartedly.